Dayton Power and Light Skip To Main Content Show Navigation

Dayton Power and Light

Skip To Side Navigation

HVAC Rebates

Rebate amounts for new heating and cooling equipment replacing existing equipment or as part of a retrofit project.

Skip To Side Navigation
MeasureRebate
Any size$50.00 
  • PTAC must have an efficiency rating greater than:
    14.0 - (0.300 x (BTUH/1,000)) EER
  • PTHP must have an efficiency rating at or above both:
    14.0 - (0.300 x (BTUH/1,000)) EER, and
    3.7 - (0.052 x (BTUH/1,000)) COP
Measure RebateMin. Efficiency
< 65,000 BTUH$40.00/ton14.0 SEER
65,000 - 135,000 BTUH$40.00/ton11.0 EER
136,000 - 240,000 BTUH$40.00/ton10.8 EER
241,000 - 760,000 BTUH$40.00/ton9.8 EER
> 760,000 BTUH$40.00/ton9.5 EER
MeasureRebateMin. Efficiency
< 240,000 BTUH @ 85°F$40.00/ton14.0 EER
MeasureRebateMin. Efficiency
CoolingHeating
< 65,000 BTUH$40.00/ton15.0 SEER7.7 HSPF
65,000 - 135,000 BTUH$40.00/ton10.8 EER2.25 COP
136,000 - 240,000 BTUH$40.00/ton10.4 EER2.05 COP
> 240,000 BTUH$40.00/ton9.3 EER2.05 COP
MeasureRebateMin. Efficiency
< 65,000 BTUH$50.00/ton15.2 SEER
65,000 - 135,000 BTUH$50.00/ton11.9 EER / 12.7 IEER
136,000 - 240,000 BTUH$50.00/ton11.4 EER / 12.5 IEER
> 240,000 BTUH$50.00/ton10.2 EER / 11.8 IEER
MeasureRebateMin. Efficiency
CoolingHeating
< 135,000 BTUH @ 59°F entering water$80.00/ton16.2 EER3.6 COP
MeasureRebateMin. Efficiency
CoolingHeating
< 135,000 BTUH @ 77°F entering water$80.00/ton14.1 EER3.1 COP
MeasureRebateMin. Efficiency
< 150 ton$60.00/ton9.562 EER / 12.5 IPLV
≥ 150 tons$40.00/ton9.562 EER / 12.75 IPLV
  • Only single chiller systems are eligible. Multiple chiller projects and chillers equipped with VFDs may receive rebates through the Custom Rebate program.
  • The chiller efficiency rating must be based on ASHRAE 90.1-2010 chiller efficiency standards.
  • A manufacturer's specification sheet with the rated EER at ARI standards must accompany the application.
MeasureRebateMin. Efficiency
< 150 ton$40.00/ton0.634 KW/ton full load
0.596 KW/ton part load
150 - 300 ton$40.00/ton0.634 KW/ton full load
0.596 KW/ton part load
> 300 ton$40.00/ton0.576 KW/ton full load
0.549 KW/ton part load
  • Only single chiller systems are eligible. Multiple chiller projects and chillers equipped with VFDs may receive rebates through the Custom Rebate program.
  • The chiller efficiency rating must be based on ASHRAE 90.1-2010 chiller efficiency standards.
  • A manufacturer's specification sheet with the rated KW/ton full load and IPLV must accompany the application.
MeasureRebateMin. Efficiency
Variable frequency drives up to 250 HP$40.00/HP 
Outside air economizer using two enthalpy sensors$250.00 
Energy recovery ventilation (ERV) with a minimum of 450 CFM and as part of an electric-powered system$1.00/CFMARI 1060 rating > 65% winter effectiveness
Window film$1.50/sfSolar heat gain coeffient of 0.40 or less
Thermal storage unit$100.00/KW shifted 
Heat pump water heater$750.00Uniform Energy Factor (UEF)
Smart thermostat$50.00Rebates available for ENERGY STAR® smart thermostats only.
  • VFD rebates are based on the HP of the motor being controlled.
  • VFD project installation must result in energy savings.
  • Soft Starts are not eligible for a rebate.
  • VFDs are for use with supply fans, return fans, exhaust fans, water pumps and cooling tower pumps only.
  • Air economizers must be installed on CEE Tier 1 or higher efficiency units.
  • Window Film rebates are applicable for windows facing East, West and South (North-facing windows do not qualify). Installation must result in energy savings on a cooling system powered by electricity.

Additional Details

  • Rebate applications must be submitted to DP&L during the same calendar year in which equipment for the project is purchased.
  • For more information, view the program terms and conditions or contact us at EnergyEfficiency@dplinc.com.
  • Rebate values are subject to change and apply only to new, unused equipment. Rebate measures and values for the 2019 programs are for equipment and services purchased and installed on or after January 1, 2019.
  • Rebates are issued directly to the customer. Each project will only be eligible to receive a single DP&L rebate.
  • Funds are allotted on a calendar-year basis and are available on a first-come, first-served basis.
  • A rebate may not exceed the customer's cost of equipment at the measure level net outside funding received, not including taxes, warranty fees, installation costs, or maintenance fees. DP&L shall make the final determination regarding rebate amounts. An individual account number will be limited to $250,000 in DP&L business rebates in any calendar year.
  • DP&L reserves the right to deny any rebate.
  • All DP&L energy programs are subject to Public Utilities Commission of Ohio rules and regulations.