You can apply for Rapid Rebates online here. Click on the equipment type below to see the current rebate amounts:

Premium Motors

Measure Rebate (per HP)
1.0 - 5.0 HP $25.00
7.5 - 20.0 HP $15.00
25.0 - 250.0 HP $10.00
  • All motors must be three-phase, ODP or TEFC, with nominal speeds of 1,200, 1,800 or 3,600 RPM.
  • All motors must meet or exceed the minimum efficiency standards listed below.
  • Efficiencies are to be full-load nominal efficiencies tested in accordance with IEEE Standards 112, Method B.
  • Motors must be squirrel cage design and conform to NEMA premium design A, B or C torque characteristics.
  • Motors must operate a minimum of 1,500 hours annually.

Minimum Efficiency Standards

  Open Drip Proof Totally Enclosed Fan Cooled (TEFC)
HP 1200 RPM 1800 RPM 3600 RPM 1200 RPM 1800 RPM 3600 RPM
1.0 82.6 85.6 77.1 82.6 85.6 77.1
1.5 86.6 86.6 84.1 87.6 86.6 84.1
2.0 87.6 86.6 85.6 88.6 86.6 85.6
3.0 88.6 89.6 85.6 89.6 89.6 86.6
5.0 89.6 89.6 86.6 89.6 89.6 88.6
7.5 90.3 91.1 88.6 91.1 91.8 89.6
10.0 91.8 91.8 89.6 91.1 91.8 90.3
15.0 91.8 93.1 90.3 91.8 92.5 91.1
20.0 92.5 93.1 91.1 91.8 93.1 91.1
25.0 93.1 93.7 91.8 93.1 93.7 91.8
30.0 93.7 94.2 91.8 93.1 93.7 91.8
40.0 94.2 94.2 92.5 94.2 94.2 92.5
50.0 94.2 94.6 93.1 94.2 94.6 93.1
60.0 94.6 95.1 93.7 94.6 95.1 93.7
75.0 94.6 95.1 93.7 94.6 95.5 93.7
100.0 95.1 95.5 93.7 95.1 95.5 94.2
125.0 95.1 95.5 94.2 95.1 95.5 95.1
150.0 95.5 95.9 94.2 95.9 95.9 95.1
200.0 95.5 95.9 95.1 95.9 96.3 95.5
250.0 95.5 95.9 95.1 95.9 96.3 95.9

Back to Top

Variable Frequency Drives - Motors

Measure Rebate (per HP)
Up to 250.0 HP $40.00
  • VFDs greater than 250 HP are considered Custom and may be eligible for rebates under the Custom Rebate program.
  • VFDs must operate a minimum of 1,500 hours annually. 
  • VFD rebates are based on the HP of the motor being controlled.
  • VFD project installation must result in energy savings.
  • For VFDs installed in HVAC systems, use the rebate values specified by the HVAC Rebate program.

Back to Top

Air Compressors

Measure Rebate (per HP)
1 - 100 HP load/no load $45.00
1 - 100 HP variable speed $125.00
  • Compressed Air and Gas Institute (CAGI) performance data sheets are required for any air compressor rebates and must be provided before any applications will be approved.  
  • New oil flooded rotary screw and rotary vane compressors are eligible for rebates.
  • Only single compressor systems are eligible. Multiple compressor systems may receive rebates through the Custom Rebate program.
  • Only compressors operating at 145 psi or below are eligible.
  • Primary storage is required on all projects.
  • Compressors must operate a minimum of 1,500 hours annually.
  • Compressors greater than 100 HP are considered Custom and may be eligible for rebates under the Custom Rebate program.

Back to Top

Variable Frequency Drives - Air Compressors

Measure Rebate (per HP)
1.0 - 100.0 HP $40.00
  • VFDs greater than 100 HP are considered Custom and may be eligible for rebates under the Custom Rebate program.
  • VFDs must operate a minimum of 1,500 hours annually. 
  • VFD rebates are based on the HP of the motor being controlled.
  • VFD project installation must result in energy savings.
  • "Soft Starts" are not eligible for a rebate.
  • For VFDs installed in HVAC systems, use the rebate values specified by the HVAC Rebate program.

Back to Top

No Loss Drains

Measure Rebate
No loss drains $100 each
  • Compressors must operate a minimum of 1,500 hours annually.
  • Only electric or pneumatically-activated no-loss drains qualify.
  • Primary storage is required on all projects.

Back to Top

Other

Measure Rebate
Engineered nozzle $20.00/nozzle
Commercial clothes washer $50.00/unit
Barrel wrap $1.00/ton

Back to Top

Page last updated August 15, 2017.